Controller of EV Charger Cable type with OCPP1.6 (Wifi,4G)

Controller of EV Charger Cable type with OCPP1.6 (Wifi,4G)

EV Charger
200€
Βασικά Χαρακτηριστικά
  • Ακρίβεια RTK εκατοστού
  • Εύκολη εγκατάσταση και χρήση
  • Συμβατότητα με όλα τα γεωργικά μηχανήματα
  • 24/7 Τεχνική υποστήριξη
  • 2 χρόνια εγγύηση
Γρήγορη Παράδοση
Δωρεάν Εγκατάσταση
24/7 Υποστήριξη

Λεπτομερή Χαρακτηριστικά

EKEPC3 OCPP1.6J EV Charging Station Controller

Model: EKEPC3-C/S
Mode: Mode 3 charging
Operating Voltage: AC230V±10%,50Hz
Outputthe PWM Signal: Max:32A,1-32A adjustable
Basic Function: 2:Overtemperature protection




EKEPC3 is using for AC EV Charging Station complies with IEC61851 or SAEJ1772 standard and DIN EN6075 installation requirement.The output of the relay is used to connect to the AC contactor that switches on/off the load,Max current can up to 63A.
The EKEPC3 controller is OCPP1.6J protocol with WIFI,2G-4G,Ethernet net communication,which can communication with controller with a OCPP1.6J protocal backend,also we can support a RS485 communication for KWH meter,the controller addtional functions including :non-contact IC card connection module(residual current monitoring unit),DLB management,LCD dislay,KWM Meter,Electronic lock,external emergency stop pushbutton,etc.These function must be NOTED when ordering



Τεχνικές Προδιαγραφές

Ακρίβεια ±2 cm RTK
Συχνότητες GNSS GPS L1/L2, GLONASS L1/L2, BeiDou B1/B2, Galileo E1/E5b
Ταχύτητα ενημέρωσης 10 Hz
Λειτουργική θερμοκρασία -40°C έως +70°C
Βαθμός προστασίας IP67
Τροφοδοσία 12V DC
Εγγύηση 2 χρόνια

Συναφή Προϊόντα

Άλλα προϊόντα που μπορεί να σας ενδιαφέρουν

Ενδιαφέρεστε για το Controller of EV Charger Cable type with OCPP1.6 (Wifi,4G);

Επικοινωνήστε μαζί μας για περισσότερες πληροφορίες και προσφορά.